We Were Here Tomorrow Laser Puzzle: Crystal Order
Solve the We Were Here Tomorrow laser puzzle: identify the three crystals, route the beam to the Master Emitter, and fix wrong configurations.
For the We Were Here Tomorrow laser puzzle, send the beam through Pingosius Crystalis → Rupium → Cattonimus, then into the Master Emitter. The beam must reach the receiver after passing the correct crystals in that order. This is a community-documented solution for the matching Optics Lab layout; check the clues in your own game before using it.
Find the right laser room
Look for the Master Emitter in a two-level hall with beam holders and coloured side rooms. A crystal-information board describes the specimens, while an inspectable screen supplies clues about their order. One player can read and relay the notes while both explorers trace the beam through the holders.
Before the final crystal sequence, the room also asks you to direct the laser through holders to open the way forward. Collect the movable pieces you find as you progress. The instructions below focus on identifying the three target crystals and reaching the emitter; they do not claim a verified position for every holder.
Identify the three correct crystals
| Order | Crystal | How to distinguish it |
|---|---|---|
| 1 | Pingosius Crystalis | The matching spiky specimen has small rounded growths on top. Check the name against the chart. |
| 2 | Rupium | Look for the smooth, rounded cluster in the turquoise section. |
| 3 | Cattonimus | Compare the cat-class rocks with the chart; the documented choice is the middle specimen with two crystal clusters. |
The first name is easy to confuse with Pingosso Crystallo. Community guides distinguish the correct Pingosius by the rounded growths on its upper spikes. Use the in-game drawing and label together rather than relying on a quick glance at the silhouette.
The clue descriptions connect the first specimen with a mirror, the second with calm or stability, and the third with heat. Matching those ideas to the order note explains why the beam needs this sequence. Do not assume that a crystal is correct merely because it changes the beam's colour: lookalike specimens can also change the colour.
Route the laser to the Master Emitter
- Find the entry beam and the holders. Turn or place the available pieces so the beam continues from one holder to the next. Tell your partner which level and holder the beam currently reaches.
- Pass through Pingosius Crystalis first. Check the specimen in the yellow section against the crystal chart before aiming the beam through it.
- Continue through Rupium. Route the beam onward to the smooth cluster in the turquoise section. Coordinate the next holder with your partner if the beam changes floors.
- Pass through Cattonimus. Bring the beam onward to the documented middle cat-class specimen. Check the order and avoid sending the beam back through a crystal already used.
- Aim the finished beam into the Master Emitter. Use the available holders to direct it to the receiver. A successful configuration reactivates the laser array and opens the way onward.
Community walkthroughs describe round orange pieces as useful for aiming a beam along a level, and pointed purple pieces as directing it between levels. Some holders rotate while others do not. Their exact positions are not mapped in this guide, so identify each holder from your current room rather than assuming an unverified universal route.
Wrong Crystal Configuration: what to check
If the beam reaches the receiver but the machine rejects it, trace it back through the specimens. Confirm Pingosius Crystalis rather than the similarly named Pingosso Crystallo, then check Rupium and Cattonimus in that order. Look for a loop that sends the beam through a crystal more than once.
If the beam never reaches the receiver, first find the last holder where it was visible. Check the next piece's position and whether it should redirect the beam across the room or between floors. Change one holder at a time so both players can see what each adjustment does.
The sources do not establish a single tested holder-by-holder route for every game version. The numbered crystal order is the documented solution; adapt the intermediate beam route to the holders and feedback visible in your session.
Coordinate the laser puzzle in co-op
Agree on landmarks such as the yellow section, turquoise section, upper floor, lower floor and Master Emitter. One explorer can read the chart while the other identifies the matching specimen and describes the beam. Repeat each crystal name before changing a holder, especially when the two Pingosius names look similar.
When the beam disappears, return to the last confirmed connection instead of adjusting several holders at once. If it reaches the emitter and displays an error, inspect crystal identity and sequence before rebuilding the entire route. For microphone and connection checks, see the co-op guide.
Continue to another puzzle
For the Greek-letter generator board, use the cable puzzle solution. The same puzzle guide also covers the G-46B / G-46C panel and greenhouse seed combinations. The walkthrough provides a room index and the earlier resin and printer steps.
Coverage and official support
Research checked November 16, 2026. The crystal names and order are cross-checked against community walkthroughs, including gameplay references; this site has not independently reproduced the full route. The exact holder placement and later-version behaviour are not independently verified here.
Updated 2026-11-16